-40%

3* Air Suspension Shock Struts & Compressor Pump For Mercedes S430 03-06 4WD

$ 232.39

  • Brand: valuezone-autoparts
  • Drive Layout: Front Engine 4WD
  • Features: Sealed
  • Included Hardware: None
  • Interchange Part Number: 2113200304, 2113200104, 2193200004, 2203200104
  • Lower Mount Type: Stud
  • Lower Mounting Isolator Included: No Isolator Required
  • Manufacturer Part Number: 10526737
  • Manufacturer Warranty: 1 Year
  • Material: Iron,Aluminium Alloy,Rubber
  • Other Part Number: 2203201338, 2203201438
  • Performance Part: No
  • Placement on Vehicle: Left, Right, Front
  • Platform: W220
  • Superseded Part Number: 2203202138, 2203202238
  • Type: Air Suspension Strut
  • UPC: Does not apply
  • Upper Mount Type: Stud
  • Upper Mounting Isolator Included: No Isolator Required
  • Vintage Part: No
  • gtin13: Does not apply

Description

Do check the compatible chart before ordering the item, or contact us for checking. Package Included: Pair for Front Left & Right Air Suspension Shock Struts and 1pc Air suspenison compressor pump Compatibility 1, Air suspension spring bags installed on the Truck, Coach and Trailer are designed usually as generic types. 2, Firestone Part Number collected all the air suspension model, which could be used as an Integration Code while searching on eBay or Amazon. 3, You can distinguish specific model of air suspension spring bags on your Autotruck/Heavy-Duty Truck/Touring Car/Passenger Coach/Trailer by checking original SPN(Supplier Part Number) listed as below, all of which has a consistent one-to-one match with specific Firestone Part Number. Mercedes-Benz S-Class W220 S430 4Matic Sedan 4-Door 4.3L 2003-2006 S500 4Matic Sedan 4-Door 5.0L 2003-2006 Platform Drive Layout: 4Matic Front Engine-Four Wheel Drive Layout OEM Part Number: air suspension sturt 2203201338,2203202138, 2203201438,2203202238 air suspension compressor 2113200304 2113200104 2193200004 2203200104 Attention: Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal injury. Any air spring which is unfolded must be refolded prior to being installed in a vehicle. Refer to the procedure. An incorrectly folded air spring could rupture, altering the handling characteristics of the vehicle. If a vehicle has been driven with an incorrectly folded air spring, a new air spring must be installed. Failure to follow these instructions may result in serious injury to vehicle occupant(s). Failure to observe the following instructions may result in a sudden failure of the air spring or suspension system. Any rear spring which is unfolded must be refolded prior to being installed in a vehicle. The air spring refolding procedure should only be used for an air spring which has never supported the vehicle's weight while in the incorrectly folded position. Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new. Do not attempt to inflate any air spring which has been collapsed while uninflated from the rebound hanging position to the jounce stop. When installing a new air spring, care must be taken not to apply a load to the suspension until springs have been inflated using the air spring fill procedure. After inflating an air spring in the hanging position, it must be inspected for correct shape. NOTE : 1.The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system. With the vehicle in NEUTRAL, position on a hoist until the wheel and tire assemblies are slightly above the ground. 2.Using the scan tool, vent the air springs. 3.Remove the air spring retainer. 4.Detach the air spring from the rear axle. 5.Remove the air spring in the following sequence. 1. Disconnect the air spring solenoid electrical connector. 2.Compress the quick connect locking ring and pull out the air tube. 3.Remove the air spring. Q&A: How soon can i receive the package? You will receive your package within 2-7 working days. How about the After-sales Guarantee? We offer a warranty with 1 year, if there's any quality problem, please contact customer service. Item Specifics UPC Does not apply Brand valuezone-autoparts Type Air Suspension Strut Placement on Vehicle Left, Right, Front Features Sealed Manufacturer Part Number 10526737 Manufacturer Warranty 1 Year Material Iron,Aluminium Alloy,Rubber Performance Part No Platform W220 Vintage Car Part No Interchange Part Number 2113200304, 2113200104, 2193200004, 2203200104 Other Part Number 2203201338, 2203201438 Superseded Part Number 2203202138, 2203202238 Upper Mounting Isolator Included No Isolator Required Upper Mount Type Stud Lower Mounting Isolator Included No Isolator Required Lower Mount Type Stud Included Hardware None Drive Layout Front Engine 4WD