Description

Toyota MR2 MK1 SC AW11 Side Skirt / Fender Flare Rubber Trim Kit Supercharged. Condition is New. This kit will keep your side skirt from rubbing against the body of your car and reduce damage as well as driving noise. Although this is not an OEM item it is guarantee to work better than your stock rubber seal. They been pre-cut with adhesive 3M double sided tape pre-apply. Each piece is cut with roughly 1 inch extra so you can adjust it to your specific need. The package contain a total of 6 pieces: 2x front, 2 rear, and 2 for the joint. Although originally the side skirt didn't comes with the seal between the 2 pieces, we add it in because it look better and improve with the noise and vibration. Description This will fit all MR2 1985 to 1989 supercharged and NA. Rubber Seals made from custom formulated EPDM rubber compound. Resistance to Ozone – Excellent Water Absorption - Excellent Sunlight Aging - Excellent Low Temperature – Excellent Compression Set - Good General Temp. Rating -20 Degrees to +158 Degrees Compression Rating Recommended 25% compression for the maximum performance. Flammability and Code Compliance FMVSS 302 UL50 This (component or material) is Recognized by UL. Representative samples of this component have been evaluated by UL and meet applicable UL requirements. Adhesive Options "BT" Pressure Sensitive Adhesive This 3M Acrylic Automotive grade tape creates the ultimate bond to the rubber and the ultimate bond to the substrate. Creates a moisture barrier and airtight seal between rubber and substrate. Highest peel and shear resistance can be used under high loads of stress and force. Has low initial tack for easy re-positioning during installation and needs 72 hours of cure time to come to full bond strength. Good heat performance -20F to +158F.